BYD SEAL 2023 - Remote Start*; Remote Start with the Electronic Smart Key; Gear Shift Controls

●
If the elec
tronic smart key does not
work, the smart key system warning
indicator on the combination
instrument 󽗊ashes, and the message
"Low key battery" is displayed on
the information display screen in
the middle of the combination
instrument, indicating that the key
battery may have run out. Replace
the electronic smart key battery as
soon as possible with reference to
the operation procedure given in
"Smart Key Battery Runs Out".
●
Except for causes mentioned above,
the PEPS system also fails to work
normally under some conditions due
to di󽗈erent service environments.
See "Smart Access and Start System"
for relevant details.
Starting the vehicle in emergencies
●
Engage the parking brake 󽗉rmly.
●
Turn o󽗈 all unnecessary lights and
accessories.
●
The gearshift lever is on "P".
●
Switch the ignition o󽗈.
●
The electronic smart key is in the
vehicle.
●
Press and hold the smart key start
button for over 15 seconds.
Check after starting
●
Instrument cluster: Con󽗉rm that
the maintenance indicator and the
speedometer work normally.
●
Brakes: In a safe area, verify that the
vehicle maintains a straight direction.
●
Other abnormalities: Check for loose
parts, leaks, and unusual noises.
If everything is OK, just enjoy your
driving.
Remote Start*
R
emote Start with the Electronic Smart
Key
1. Press and hold the remote start/stop
button on the electronic smart key for
two seconds to start the vehicle. Turn
signals will 󽗊ash three times after it is
started.
2. If there is no valid operation within 10
minutes after remote start, the vehicle
stops and powers o󽗈, and turn signals
󽗊ash twice.
3. Press and hold the remote start/stop
but
ton on the electronic smart key
for two seconds. The vehicle stops
and powers o󽗈, and turn signals 󽗊ash
twice.
Gear Shift Controls
●
The gear position of the gear actuator
is marked on the gearshift lever.
●
"P" gear is for parking, press this
button to park the vehicle and the
parking indicator will light up. Press
the brake pedal to start the vehicle,
you may shift from "P" to another
position.
103
04
USING AND DRIVING