BYD SEAL 2023 User Manual

●
Dynamic mode: displays the es
timated
driving range based on the available
battery power and current average
energy consumption.
●
The set driving range display mode is
memorized by the system. When the
vehicle is powered o󽗈 and then on,
the display mode set last time will be
maintained.
REMINDER
●
When the Dynamic range display
mode is set:
●
The driving range that is
displayed after a full charge may
vary, depending on calculations
of the energy consumed the last
time the vehicle is used.
●
The displayed driving range is
adjusted based on whether the
A/C is on, selection of driving
mode, and the driver's driving
habits, so that this range can
be closer to the estimated
remaining range under current
use.
Energy Regeneration
Se
ttings
Energy regeneration: In this process,
the motor will generate reverse torque
when the vehicle is decelerating, and the
generated energy will be recovered and
reused to improve the energy utilization
rate of the vehicle.
●
Braking regeneration:
●
When the vehicle is running in D
position, if you completely release
the accelerator pedal and depress
the brake pedal, and the vehicle is
in a stable state, priority is given
to responding to motor regeneration
for deceleration during braking
and deceleration. When the motor
c
apacity is insu󽗋cient, the hydraulic
brake will actively intervene to
maintain the deceleration demand
of the vehicle, and the generated
energy will be recovered to improve
the vehicle economy.
●
Sliding regeneration:
●
When the vehicle is running in
D position, if you release the
accelerator pedal at a certain depth,
the motor will output reverse torque
to decelerate the vehicle, and the
generated energy will be recovered
to improve the vehicle economy.
●
During driving, energy is recovered
through regenerative brakes when
the vehicle decelerates. For higher
e󽗋ciency, do not accelerate or
decelerate the vehicle unnecessarily.
●
The energy regeneration intensity
can be set with the regenerative
mode button or on the infotainment
touchscreen.
●
Standard: When the accelerator
pedal is released, the motor
controller recovers energy in the
standard level, and the vehicle
deceleration is in the standard level.
●
High: When the accelerator pedal
is released, the motor controller
recovers more energy, and the
vehicle deceleration is high.
●
The corresponding settings can be
made in infotainment system →
→
Ne
w Energy → Energy Management →
Energy Regeneration Mode.
●
You can select the regeneration
intensity based on the deceleration
sense when releasing the accelerator
pedal. Di󽗈erent deceleration senses
deliver di󽗈erent driving experiences.
●
The set energy regeneration intensity
will be memorized. When the vehicle
90

BYD SEAL 2023 Specifications

General

Brand	BYD
Model	SEAL 2023
Category	Automobile
Language	English