BYD SEAL 2023 - Intelligent Cruise Control (ICC)

●
A
CC system performance has
degraded or the instrument cluster
has prompted an system error.
WARNING
●
A
CC only serves as a driving
assistance function, so the driver
must be fully responsible for
driving safety.
●
In󽗊uence of weather, road
conditions, and other factors may
cause ACC to fail.
●
Use ACC based on your needs,
tra󽗋c, and road conditions.
Intelligent Cruise Control
(IC
C)
●
The intelligent cruise control (ICC)
system integrates ACC and lane
centering control (LCC). It helps control
the vehicle both longitudinally and
transversely at speeds between 0
km/h and 120 km/h to reduce the
driving burden and provide a safe and
comfortable driving environment.
●
When the function is enabled, the
driver must always hold the steering
wheel and control the vehicle when
necessary.
●
Longitudinal assistance, driven by the
ACC system, keeps the vehicle at a
󽗉xed speed or a 󽗉xed distance from the
road user ahead.
Status Description
●
ICC standby: The ICC system is
on standby by default and can be
manually activated. If the vehicle does
not meet activation conditions, the
vehicle must be checked until such
conditions are met. At this time,
is displayed on the instrument cluster.
●
IC
C activated: The ICC system is
operational. It maintains the set speed
or automatically adjusts the distance
from the vehicle ahead. At this time,
is displayed on the instrument
clus
ter.
●
ICC failure: There has been a failure
in the system. No operation can be
performed, and the ICC fault indicator
is diaplayed on the cluster.
ICC Activation Conditions
●
The EPB has been released.
●
The vehicle is in Drive.
●
The vehicle does not slide backwards.
●
The trunk, hood, and all doors are
closed.
●
Driver seat belt is fastened.
●
The ESC system is on, but not activated
yet.
●
Vehicle speed is not greater than 120
km/h.
●
Brake pedal is pressed at speed 0; or
brake pedal is not pressed at speeds
above 0.
●
There is no vehicle network
communication failure prompt on the
instrument cluster.
●
The AEB function is not activated.
●
Two-way lane lines are clear and the
vehicle is at the center of the lane.
How to Use
●
Press the button③ on the steering
wheel to activate or exit ICC. (By
default, when the function is activated,
the current speed is set as the cruise
speed. If the current speed is below
113
04
USING AND DRIVING