BYD SEAL 2023 - Panoramic View System

●
The alert v
olume increases with
vehicle speed in the range of 0 km/h
to 20 km/h.
●
The alert volume decreases with
vehicle speed in the range of 20 km/h
to 30 km/h.
●
The alert stops automatically when
vehicle velocity is over 30 km/h.
●
The vehicle makes a continuous and
balanced prompt sound when moving
in reverse.
How to Use
To turn on or o󽗈 the engine sound
simulator, slide down the top status bar
on the infotainment screen to display
the shortcut page. AVAS has two vehicle
prompt sound sources: Standard and
Brand, in which Standard has three sound
sources: Standard, Dynamic and Comfort,
Brand has two sources: Standard and
Comfort. To set the mode, go to
infotainment touchscreen
→ Vehicle
se
ttings → Noti󽗉cation.
WARNING
●
The A
VAS pause switch can only
be used if there are no other
road users within a short distance,
and no audio prompt is needed
considering the surroundings (for
example, in a tra󽗋c jam or on the
highway). As long as pedestrians
may appear around the vehicle,
the AVAS needs to be turned on.
WARNING
●
If the v
ehicle travels at a low
speed with the AVAS disabled,
it will not be able to remind
pedestrians of the approaching
vehicle, which may result in a
car accident and, in severe cases,
death or personal injury.
●
If the AVAS prompt sound cannot
be heard when driving at a low
speed, stop the vehicle in a
relatively safe and quiet place,
open the window, then drive at
a constant speed of 20 km/h in
D gear and check whether an
audio prompt can be heard from
the front of the vehicle. If it is
con󽗉rmed that there is no sound,
contact a BYD authorized dealer
or service provider to deal with it.
Panoramic View System
With the ignition swit
ched on, tap
Vehicle View on the infotainment system
homepage or press the
button on the
s
teering wheel to access the panoramic
view.
●
Landsc
ape mode:
●
Tap the front, rear, right, or left area
of the vehicle icon on the right. View
of the selected area is displayed in
the image section on the left.
130