EasyManua.ls Logo

BYD SEAL 2023 - Anti-lock Braking System

BYD SEAL 2023
211 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
discs. This shortens brake response
time and br
aking distance.
As long as the system detects rain
or the wiper ON signal, the brake
discs are repeatedly wiped at certain
intervals to improve safety.
ESC working
If there is a risk of skidding or
backsliding when the vehicle starts
on a slope, or if either drive wheel is
spinning, the ESC indicator 󽗊ashes to
indicate that ESC system is working.
Disabling ESC
If the vehicle gets stuck in snow or
mud, ESC may reduce power output
from the motor to the wheels. In this
case, you may need to turn o󽗈 the
system to get out of the jam.
Turning o󽗈 ESC
To turn o󽗈 the ESC system, tap
Infotainment system
→ ADAS →
Ac
tive Safety → ESC. ESC also checks
its operating status in real time. If
ESC OFF switch is pressed while
ESC system is working, the system
will complete the active intervention
control rather than executes the
"shutdown" command immediately.
ESC is disabled only after the
intervention control is complete.
Some functions of the ESC system may
be re-enabled if you press the ESC
OFF switch again or the vehicle speed
exceeds the threshold (80 km/h). In
order to prevent ESC from being
turned o󽗈 suddenly, ESC can be
activated again only when it is not in
a vehicle dynamic intervention state.
Restarting ESC after the motor is
powered o󽗈
When the ESC system has been
turned o󽗈, restarting the motor will
automatically restart ESC system.
ESC sys
tem start and speed linkage
If the ESC system is turned o󽗈,
when the vehicle becomes extremely
unstable as the speed increases and
exceeds the threshold (80 km/h), the
ESC system starts on its own.
ESC activated
If the ESC fault indicator
󽗊ashes,
driv
e with caution.
Turning o󽗈 ESC
Be careful when ESC is disabled,
and drive at speeds suitable for road
conditions. The ESC system ensures
vehicle stability and its driving force.
Never turn it o󽗈 unless necessary.
Tire replacement
Make sure all tires are of the same
size, brand, tread, and total load. In
addition, be sure to in󽗊ate tires to
the recommended pressure.
Neither ABS nor ESC will work
properly if the vehicle is 󽗉tted with
di󽗈erent tires.
For details on tire or wheel
replacement, it is recommended to
contact a BYD authorized dealer or
service provider.
Tire and suspension handling
The use of any defective tire or
modi󽗉ed suspension a󽗈ects the
driving safety system and may cause
the system to fail.
Anti-lock Braking System
The ABS hydraulic system has
two separate circuits, each running
diagonally through the vehicle (left
front wheel brake connected to the
right rear wheel brake). If one circuit
fails, two wheels can still be braked.
137
04
USING AND DRIVING

Table of Contents

Other manuals for BYD SEAL 2023

Related product manuals