BYD SEAL 2023 - Page 83

REMINDER
●
Do no
t open the charge port door
forcibly when it is locked.
●
If the charge port door is frozen
due to weather or other reasons,
do not force it open.
●
Connect the power supply terminal:
●
Plug the EV Mode 2 Charging Cable
into a household socket.
●
Connect the vehicle port:
●
Plug the charging connector correctly
into the port.
●
After the charging connector is
inserted, the charging connection
indicator
lights up on the
ins
trument cluster.
REMINDER
●
Do no
t forcibly insert the
connector with the electric lock
engaged.
●
In the char
ging process, charging
parameters and the charging sign are
displayed on the instrument cluster.
●
At this point, you can schedule
charging on the infotainment
touchscreen. See "Reservation
Charging" for the con󽗉guration
process.
REMINDER
●
During charging, the estimated
remaining time to full
charge is displayed on
the instrument cluster or
infotainment touchscreen. It is
normal that the remaining time
to full charge may vary slightly,
depending on the temperatures,
SOC, and charging facilities.
●
Reservation charging cannot be
used when the battery is too low.
3. Stopping charging
●
End the char
ging:
●
The charging automatically ends
when the vehicle is fully charged.
●
Press the unlock button on the
smart key or press the door handle
microswitch (while carrying the
smart key), then the vehicle will stop
charging.*
●
Disconnect the charge port:
●
If the anti-theft lock is deactivated,
press the mechanical button of the
charging connector or pull out the
charging connector as needed.
●
If the anti-theft lock is active, press
the unlock button on the key or press
the door handle microswitch (when
the key is nearby), then pull out the
charging connector.
REMINDER
●
T
o unlock the vehicle, press
the unlock button on the key
(when charging the vehicle with
ignition switched o󽗈) or press the
microswitch on the door handle
(when the key is nearby).
82