EasyManua.ls Logo

BYD SEAL EV - Page 124

BYD SEAL EV
206 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
If LDP system is activated for over
󽗉ve seconds, it gives visual and
audible alarms at the 󽗉fth second
and continues until this activation
ends. sound and visual alarm. If the
system is activated twice or more
within a continued 180-second cycle,
the system alarms. For the third
intervention (and any further ones),
alarms are extended by at least 12
seconds.
Usage
To enable or disable LDA, go to
Infotainment system and tap ADAS
→ Driving Assist → Lane Assist System.
There are three LDW modes, audio
alarm, steering wheel vibration, and
both.
When LDW or LDP is enabled, the
instrument cluster displays .
When activated, LDW gives alarms (in
the form of audio alarm, optical alarm
and steering wheel vibration) will
be activated, and the corresponding
virtual lane line on the instrument
cluster will turn red.
When the LDP is activated, an alarm
(modes: audible alarm, optical alarm
and steering wheel vibration) will be
activated,
on the instrument cluster
will 󽗊ash twice, and the corresponding
virtual lane line will turn blue.
In the event of malfunction, a icon
is displayed on the cluster.
System limitations
In a complex road tra󽗋c environment,
the LDW system may detect the lane line
incorrectly or fail to detect the lane line.
The system may be a󽗈ected or give no
response in the following cases:
Poor visibility in snowy, rainy and
foggy days.
Dirty or fogged windshield, or blocked
multifunctional video controller.
Glaring from direct sunlight, water
re󽗊ection on roads or oncoming
vehicles.
Sudden changes in light, such as
entering/exiting a tunnel.
Lane lines obscured by tree's shadows
on roads in direct sunlight in sunny
days;
Unidenti󽗉able road boundary with
grass, soil or curb.
Precautions
LDW will be suppressed if turn signal
used and the vehicle changes lane as
indicated by the turn signal.
LDW may be suppressed if the vehicle
travels over lane lines, or lane lines
are unclear, too thin, worn, blurred or
covered by dirt/snow.
LDW may be suppressed if the lane is
too wide or too narrow, the number
of lanes increases or decreases, lane
markings change suddenly on ramps
or exits, or in situations of complex line
arrangements.
LDW may be suppressed on slopes or
winding roads when the vehicle travels
too close to the vehicle ahead or the
vehicle ahead blocks lane lines.
LDW may be suppressed when the
vehicle jolts, accelerates or decelerates
too quickly, or takes a sharp turn.
The system operation may be a󽗈ected
if the windshield within the visual 󽗉eld
of the multifunctional video controller
is cracked, if the windshield glass
is dyed or inadequately coated, if
any re󽗊ective object is placed on the
dashboard, or if any other object
interferes with camera sight.
For safety reasons, do not test LDW
function on your own. The function will
be interrupted if the multifunctional
123
04
USING AND DRIVING

Table of Contents

Related product manuals