Reversing Radar Power Switch
• To enable or disable the reversing
radar system, go to Infotainment
touchscreen → ADAS → Parking
Assist.
• When the ignition status is "OK" and
EPB is released, the parking assist
system is enabled automatically.
•
When enabled, the system raises
an alarm if obstacles are found
surrounding the vehicle; when
disabled, it does not.
Sensor Type
• When the sensor detects an
obstacle, the corresponding image is
displayed on the infotainment screen*,
depending on the location of the
obstacle and its distance from the
vehicle.
• When the driver conducts parallel
parking or reverse parking, the
sensor measures the distance between
the vehicle and the obstacle
and communicates this information
through the infotainment screen
and the speaker. Be aware of the
surroundings when using this system.
①Front right sensor
②Front left sensor
③Rear right sensor
④Rear left center sensor and rear right
center sensor
⑤Rear left Sensor
Distance Display Alarm
When the sensor detects an obstacle, the
location of the obstacle and its general
distance from the vehicle is displayed on
the infotainment screen, and the speaker
beeps.
Working example of center sensors
General Distance (mm) Infotainment Display Alarm Sound
About 700 to 1,200 Slow
About 300 to 700 Fast
About 0 to 300 Continuous
133
04
USING AND DRIVING
To Next Page
Loading...
