• The charging time of high-voltage
varies with the charging mode, current
SOC, real-time temperature, service
time, ambient temperature and other
conditions.
• Use charging equipment that complies
with local standards.
Charging Mode
• Charging Reservation (Only AC):
Charge the vehicle regularly at a
scheduled charging time set by the
user.
• Immediate charging: Charging starts
after the charging connector is
connected.
General Charging
Troubleshooting
Fault Possible Cause Solution
Charger is
connected,
charge starts,
but battery
will not
charge.
High-voltage battery is
full
When the high-voltage battery is fully charged,
the charging will stop automatically.
High-voltage battery
temperature is too high
or too low
Keep the vehicle in an environment with
appropriate temperature and charge it when the
temperature becomes normal.
Iron Starter Battery
Over-discharging
Please replace Iron Starter Battery.
Charging equipment
failure
If it is veried that the charging equipment's
power indicator is working properly, or that
there are no other unusual indications, change
the charging equipment or contact the charging
equipment supplier.
Vehicle display failure
Verify that there is a charging system fault
message on the instrument cluster, then stop the
charging. It is recommended to contact a BYD
authorized dealer or service provider.
81
04
USING AND DRIVING
To Next Page
Loading...
