BYD SEAL EV - Smart Access and Start System; Start-Up Function; Antenna Position

REMINDER
• Prevent excessive force from
distorting or breaking the key
during the operation.
Smart Access and Start
System
Use the smart key to unlock or lock the
vehicle doors and start the vehicle.
Access Function
Use the smart key to unlock or lock the
vehicle doors (See this Chapter “
P53 ”
and “ P54 ”)
REMINDER
• If the electronic smart key is too
close to a door handle or window,
it may not be possible to activate
the entry function.
Start-up Function
With the smart key inside, press the brake
pedal and the START/STOP button to start
the vehicle. (See " P103 ".)
REMINDER
• Don’t touch START/STOP button
when driving.
Antenna Position
①Interior detection antenna
②Exterior detection antenna
Active area
The smart access and start functions take
e󽗈ect only when the registered smart key
is within the active area.
① Active area of the access function:
about 1 m from the front door handle and
the exterior trunk switch.
②Active area of the start function: inside
the cabin.
If another smart key is near this vehicle's
smart key, unlocking may take longer
than usual, which is normal.
REMINDER
In the following situation, smart
acess and start system may not work
normally:
• There are facilities nearby
emitting strong electromagnetic
wave, such as television towers,
power stations, and radio stations.
• The smart key is carried together
with communication devices,
59
03
CONTROLLER OPERATION