BYD SEAL EV - Vehicle Storage

• EPB switch - Check whether the switch
is functional.
• Iron Starter Battery battery - Check
the battery and terminals condition for
corrosion monthly.
• A/C system - Check the operation of
A/C units weekly.
• Tires - Check tire pressure monthly.
Check tread wear and whether there
are foreign bodies embedded.
• Windshield defroster - Check the
defroster vent monthly.
•
Lights - Check the condition of
headlights, position lights, tail lights,
high mount brake light, turn signals,
rear fog lights, brake lights and license
plate light monthly.
• Doors - Check whether the trunk lid
and all other doors (including rear
doors) can be opened freely and
locked securely.
• Horn - Check whether the horn is
functioning properly.
REMINDER
• There is risk of damage or
accidents if the vehicle is
driven for long periods without
inspection.
Combination Lights
Front Combination Lights adjustment
• Headlights are aligned before vehicle
delivery. If the vehicle carries heavy
load frequently, headlights may need
to be realigned. It is recommended to
have the headlights aligned by a BYD
authorized dealer or service provider.
Fogging of lights
• Combination lights, tail lights, and
turn signals on the side mirrors
may become foggy after heavy
rain or cleaning. This is similar to
condensation on the side window
during rain. It does not mean any
problem with your vehicle.
• The lights are a relatively enclosed
and narrow space. The temperature
is very high when they light up
(the mask and re󽗊ector could be
burned and deformed easily), so
they need heat dissipation. There are
heat dissipation holes on the lamp
housing for convection. The greater
the temperature di󽗈erence is, the more
active the convection is. During the
convection, the moisture in the air
inevitably enters a lamp. Factors such
as exposure to sunlight, convection,
and bulb heating can cause the
moisture in the air to condense into
fog or water beads easily on the lamp
surface at low temperatures. This is
called fogging of lights.
REMINDER
• If moisture appears on the inside
of the combination lights or on
the inside of the turning lights
on the side mirrors, this could
be due to high humidity in
the air or a large temperature
di󽗈erence between the vehicle
and its surroundings. When
driving, turn on the combination
lights or turning lights, and the
condensation in the lights will
disappear after driving for a short
period of time.
•
If there is a noticeable amount
of water inside the lights, it
is recommended to drive to a
BYD authorized dealer or service
provider for maintenance.
Vehicle Storage
• If the vehicle needs to be parked for
a long time (more than a month),
the following preparations should
be made. Proper preparation helps
169
06
MAINTENANCE