BYD SEAL EV - Odometer Toggle Switch; Mode Switch Group; Hazard Warning Light Switch

Odometer Toggle Switch
•
Press the odometer toggle switch to
select Total Mileage, Mileage 1, and
Mileage 2. The odometer displays the
switching status accordingly.
• Press this switch to reset mileages 1
and 2.
Mode Switch Group
①Snow Mode button
• Press down the snow mode switch② to
put the vehicle in snow mode.
•This mode is recommended on fairly
strong surfaces that are covered
with a layer of loose and slippery
materials (e.g., grass, snow, ice, or
gravel).
•Snow mode optimizes the towing,
driving, and manipulation features
in slippery conditions, and the
accelerator pedal is selected with
caution.
CAUTION
• Shutting down the ESC system
may help if the motor
performance is degraded in soft
snow conditions by the activation
of dynamic stability control. The
ESC system must be restarted
after conditions are back to
normal.
• Roll the roller② to switch ECO,
NORMAL and SPORT modes cyclically.
Hazard Warning Light
Switch
When the
button is pressed, all
turning lights and turn signals on the
instrument panel start 󽗊ashing. They all
stop 󽗊ashing when the button is
pressed again.
73
03
CONTROLLER OPERATION