CAUTION
• Do not open the hood when
wiper arms are lifted, as this may
damage the hood and wiper arms.
Replacing Wiper Blades
With the vehicle powered up (OK), users
can turn on the wiper maintenance
function by tapping Infotainment
-
Vehicle Health - Maintenance Settings.
After this function is turned on, the
wiper will run to a high position and
then stop to facilitate maintenance
and replacement of the wiper. After
maintenance, the driver can turn o the
wiper maintenance function to make the
wiper return to the reset position.
1. Pull up the wiper arm at the driver
side, and then pull up the other at the
passenger side.
2. Press the wiper lock button.
3. Hold the wiper blade and pull it out
along the indicated direction.
4. When installing a new wiper blade,
follow the reverse procedure.
CAUTION
• Do not open the hood when
wiper arms are lifted, as this may
damage the hood and wiper arms.
• Do not directly push the
wiper arm to let the wiper
blade straightly strike onto the
windshield when laying down the
wiper blade after washing the
vehicle.
• Do not bend wiper blades, or
block them when the wipers are
operating.
141
04
USING AND DRIVING
To Next Page
Loading...
