BYD SEAL EV - Cooling System; Braking System

REMINDER
suddenly open and cause an
accident.
Cooling System
• It is required that the liquid level
should be between the Maximum(MAX)
and Minimum(MIN) marker lines of the
expansion tank.
•
The refrigerant should always be
of the same speci󽗉cation as the
original refrigerant, without adding
any mixture. Di󽗈erent brands and
types of refrigerant should not be
mixed.
• If the level is below the MIN line,
refrigerant should be re󽗉lled to the
MAX line. Check the cooling system for
leakage.
REMINDER
• Opening the coolant expansion
tank when the motor has not
yet fully cooled down may cause
coolant to squirt out, resulting in
severe burns.
CAUTION
• Do not add any rust inhibitor
or other additives to the cooling
system. This is because these
additives may be incompatible
CAUTION
with the coolant or motor
components.
• Before opening the coolant
expansion tank, verify that the
motor, high-voltage electrical
control integration module,
coolant expansion tank cap and
the radiator have cooled down.
Braking System
•
Check the level in the 󽗊uid tank
monthly, and change the brake 󽗊uid
according to the travel time and
mileage speci󽗉ed in Maintenance
Schedule.
• Be sure to use the brake 󽗊uid of the
same speci󽗉cations as the original
brake 󽗊uid, and di󽗈erent types of
brake 󽗊uid should not be mixed.
• It is required that the level in the
󽗊uid tank should be between "MAX"
(maximum level) and "MIN" (minimum
level) marks.
• If the level is below the MIN mark,
check if the braking system leaks and
the brake friction blocks are worn.
Washer
• During normal use, check the liquid
level of the windshield washer
reservoir at least monthly.
171
06
MAINTENANCE