BYD SEAL EV - Tire Pressure Monitoring

• Height Adjusting: Used to adjust
the height of HUD virtual image in
between 1 and 10. A total of 21 values
are available, and the default value is
0.
•
Brightness Adjusting: Used to adjust
the height of HUD virtual image in
between 1 and 11. A total of 11 values
are available, and the default value is
6.
• Whirling Adjusting: Adjust the angle of
HUD virtual image range 1 to 11 values,
the default value is 0°.
•
Mode Setting: Used to select "Classic"
(default setting) or "Snow" mode
according to the service environment
of the vehicle.
• Settings optional for display: Safe
driving assistance can be selected and
is enabled by default.
CAUTION
• Do not put articles on the head-up
display.
• Wipe the dust on the dust-proof
board with soft cotton cloth or
paper towel.
• No water or other liquid is allowed
to 󽗊ow into the opening of the
head-up display.
Tire Pressure Monitoring
Direct Tire Pressure Monitoring
System*
• The direct tire pressure monitoring
system is an auxiliary system that
monitors tire pressure in real time to
improve vehicle safety and comfort
and reduce tire wear and energy
consumption due to insu󽗋cient tire
pressure.
• You can access the instrument cluster
menu by pressing the
button on the
steering wheel, navigate to the driving
information bar by pressing the
and buttons, and then select the
tire pressure display page using the
roller on the button.
Tire pressure system alarm
•
When the pressure of any tire is
lower than 80% of the standard tire
pressure and the system is running, the
tire pressure fault warning light lights
up and the tire pressure value turns
yellow. In that case. it is recommended
to check for slow air leakage and
in󽗊ate the tire to the correct pressure
value.
• When the temperature of any tire
is above 85°C for 3 consecutive
minutes, the tire pressure system
will give a high temperature alarm,
and the temperature value of the
corresponding tire will turn yellow.
You are then recommended to stop
the vehicle and wait for the tire
temperature to decrease before further
driving.
• When one or more tires leak air quickly
and the system is running, the tire
pressure fault warning light 󽗊ashes
constantly and the tire pressure value
turns red. In that case, promptly stop
the vehicle and replace tires or contact
a BYD authorized dealer or service
provider.
128