across the entire shoulder without
contacting the neck or falling from the
shoulder. Wear the lap portion of the
seat belt as low as possible across the
hips.
3.
Insert the latch plate into the buckle
until a "click" is heard, then pull it back
to make sure it is rmly locked. Do not
fasten the belt with any part of the
strap twisted.
4. Adjust the height of the (front)
seat belts for optimum comfort and
protection.
①Press the seat belt height adjuster
release button.
②Hold the seat belt height adjuster up
and down, adjust the front seat belt to
the comfortable height and release the
height adjuster.
5. Pull the belt rmly to verify that it is
locked.
WARNING
• The shoulder belt should cross
the center of the shoulder. The
seat belt should be far from the
neck and not liable to slip from
the shoulder; otherwise, it cannot
function well in the event of
emergency braking or accident,
and may even cause severe injury.
• The lap belt should be positioned
as low as possible around the hips
to avoid serious injury due to the
intense lap belt forces against the
abdomen in an accident.
•
The seat belt should be tted tight
to the body for better protection.
6. Unlock the seat belt.
• Press the red unlock button on the
buckle. The latch plate pops out, and
the seat belt automatically retracts. If
the seat belt does not retract smoothly
and automatically, pull it out and
check whether it is twisted.
15
01
SAFETY
To Next Page
Loading...
