EasyManua.ls Logo

BYD SEAL EV - Page 46

BYD SEAL EV
206 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CAUTION
Try not to drive the vehicle when
the warning light is on. Contact a
BYD authorized dealer or service
provider to check the problem as
soon as possible.
High-voltage battery overheating
warning light
If this warning light is on, it
indicates that the high-voltage battery
temperature is too high and the
vehicle must be stopped to cool
down. When the high-voltage battery
overheat warning light 󽗊ashes, it is
recommended to immediately stop the
vehicle safely and leave the vehicle as
soon as possible.
The high-voltage battery may overheat
under the following operating
conditions:
Long-distance climbing for a long
time in hot weather.
Long period of stop-and-go
tra󽗋c condition, frequent rapid
acceleration, hard braking, or vehicle
running for a long time without
pause.
High-voltage battery fault
warning light
This warning light turns on when
the vehicle power has just been
switched to the "OK" position. If the
high-voltage battery system is working
properly, this warning light will turn
o󽗈 in a few seconds. Thereafter, if the
system fails, this light will light up
again. It is recommended to contact
a BYD authorized dealer or service
provider for inspection as soon as
possible.
If any of the following cases occurs,
it means that there are faults in
the components monitored by the
warning light system. In such case,
it is recommended to contact a BYD
authorized dealer or service provider
for vehicle inspection as soon as
possible.
This warning light is steady on when
the ignition switch is on OK.
This warning light is steady on or
occasionally turns on while driving.
PCW warning light (red)
When this warning light is on or
󽗊ashes, pay attention to the distance
from the vehicle ahead, and do not
get too close to it to prevent potential
collision.
Motor coolant overheating
indicator
If this indicator stays on, it indicates
that the motor controller coolant
temperature is too high. Please park
the vehicle in a safe area until this
indicator goes out.
Tra󽗋c sign recognition (TSR)
indicator*
When this indicator lights up, it means
that the vehicle system has recognized
the speed limit value on current road
section.
Other Instrument Cluster Fault
Prompts
The instrument cluster may display the
following error messages. Handle them
according to the recommended handling
methods :
45
02
INSTRUMENT CLUSTER

Table of Contents

Related product manuals