EasyManua.ls Logo

BYD SEAL EV - Page 57

BYD SEAL EV
206 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
①Trunk Lid Close Button*
With the trunk lid opened and being
stationary, press the trunk close
switch. The trunk then closes.
Press the trunk close switch a second
time to stop the lid at the current
position. Press the trunk close switch
a third time to have the lid move
reversely.
②Vehicle Lock Button*
Press the lock switch on the valid
smart key, the trunk will be closed
and the vehicle is locked. If the vehicle
power is o󽗈, the anti-theft mode will
be activated.
REMINDER
Before closing the trunk, verify
that the doors, windows, sunroof,
etc. are closed to avoid property
loss.
Emergency unlocking the trunk from
inside the vehicle
1. Pull up the folding release clasp on the
seat back to fold the rear seat back.
2. There is an emergency unlocking
mechanism on the lid cover, open the lid
cover in the car by pulling the emergency
opening lever on the left (as shown in the
󽗉gure).
REMINDER
When the entire vehicle is
powered o󽗈, the trunk can be
unlocked from inside the vehicle.
Setting the trunk lid opening height*
Stop the opening lid motion at the
desired position. Press and hold the lid
switch for at least 3 seconds to set lid
height. There will be a beep to indicate
that the height has been successfully
set.
When the ignition is switched o󽗈,
press and hold the microswitch while
carrying the smart key to roll up
or down all windows. (To enable
or disable this function, go to the
Infotainment touchscreen → Vehicle
settings → Window and Lock.)
56

Table of Contents

Related product manuals