Manual operation
•
Press the window regulator switch to
① mode position and keep it (for
vehicles without anti-pinch function,
directly press and hold the window
regulator switch) to lower the window;
releasing the switch can immediately
stop the window lowering; pull up
the window regulator switch to ①
mode position and keep it (for vehicles
without anti-pinch function, directly
pull up and hold the window regulator
switch) to raise the window; releasing
the switch can immediately stop the
window raising.
Auto lifting
• Press the window regulator switch to
② mode position and release it to
automatically lower the window; pull
up the window switch to ② mode
position and release it to automatically
raise the window.
Anti-pinch Function
• If someone or an object is caught
by the window when it is rolling up,
the window stops and rolls down
automatically.
REMINDER
• Do not intentionally test the
anti-pinch function by jamming
any part of your body into the
window.
• The anti-pinch function may not
work if an object is jammed into
REMINDER
the window when it is almost
completely closed.
• Windows with anti-pinch function
can control opening or closing
the window by “intelligent voice
assist”.
Window automatic rolling-up function
and anti-pinch function failure
• If the window working indicator
ashes, it indicates that the automatic
window closing and anti-pinch
functions fail. In this case, follow
the steps given below to restore the
functions:
•
Pull up and hold the manual closing
gear of the regulator switch to
allow the window to lift to the top
position and keep the window stall
at the top position for 400 ms,
until the switch indicator changes
from ashing to staying on. This
means that initialization has been
completed. The anti-pinch module
has all functions except the soft stop
function. When the window glass
runs down to the locked rotation (400
ms), it has a soft stop function.
Delay function
• After the vehicle is powered o, if the
front doors are not open, the four-door
window controller has a 10min roll-up/
down delay period. During this period,
the windows can still be rolled up and
down. If either of the front doors is
opened during this period, the delay
function is canceled, and the four-door
window controller can no longer be
used to operate the windows.
WARNING
• Before closing a power window,
ensure passengers’ hands are
not placed upon the window
71
03
CONTROLLER OPERATION
To Next Page
Loading...
