BYD SEAL EV - Page 87

• Charging settings:
•For AC charging pile/box subject to
authentication, swipe the card or
scan the QR code. For details, see the
user manual for charging pile/box.
• The charging connection indicator
on the instrument cluster lights up.
• In the charging process, the instrument
cluster displays relevant charging
parameters and the charging sign.
•
At this point, you can schedule
charging on the Infotainment system.
See "Charging Reservation" for the
setup process.
3. Stopping charging
•
End the charging:
•Charging ends automatically when
early stop time is due or the charging
is complete.
•
Press the unlock button on the
smart key or press the door handle
microswitch while carrying the smart
key and pull out the charging
connector.
• Disconnect the charge port:
•Disconnect as per the instructions
in "Using Household Portable AC
Charging Equipment".
• Close the charge port cap and the port
door (see "Using Household Portable
AC Charging Equipment").
• Store the equipment properly.
•If using an AC charging pile/box,
place the charging connector in its
designated location in the charging
pile/box.
Using DC Charging Piles*
1. Equipment descriptions
• Use the DC battery charger in public
places to charge the vehicle. Generally,
it is installed in a
speci󽗉c charging
station.
• Equipment speci󽗉cations: Please
check the instructions for the charger.
• Charging time: Refer to the charging
time message on the instrument
cluster or infotainment system.
2. Charging
DC charging is achieved by connecting
the vehicle to a DC charger via its
connector.
•
Unlock the charge port door, then
open the port door and cap.
• Connect the vehicle port:
•
Plug the connector into the port,
making sure it is tight.
• Operate the charging equipment to
start charging.
• The charging connection indicator
on the instrument cluster lights
up.
• In the charging process, the instrument
cluster displays relevant charging
parameters and the charging sign.
3. Stopping charging
• End the charging:
•Charging ends automatically when
early stop time is due or the charging
is complete.
•Press the unlock button twice within
3 seconds or press the microswitch
86