CAB a2+ - Printing the Font List

30
31
5.4 Font List

Function not available at A2+ !
The Font list function prints the most important parameters of the fonts available in the printer in tabular form.
The table contains both the original fonts in the printer and other fonts loaded into the printer. The printout occurs
using the heat level and print speed specied in the Setup > Print param. menu.
i
Notice!
The printout occurs without taking the label gaps into consideration. This is why endless media are most
suitable for this purpose.
Insert printable medium (labels, endless paper) which extends across the entire printing width.
If the printout is to occur using thermal transfer printing, insert transfer ribbon with the maximum width.
Press the menu button.
Select Test > Font list print menu.
Start printout with the  button.
The printout can be cancelled with the cancel button.
Font list
Mach4/300 - 10/09/2007 -15:08:36
Firmware V3.11 (Aug 9 2007) - #111070553751
No. Name Type Description
-1 _DEF1 Bitmap Default Font 12x12 dots
-2 _DEF2 Bitmap Default Font 16x16 dots
-3 _DEF3 Bitmap Default Font 16x32 dots
-4 OCR_A_I Bitmap OCR-A Size I
-5 OCR_B Bitmap OCR-B
3 BX000003 TrueType Swiss 721
4 BX000005 TrueType Swiss 721 Bold
596 BX000596 TrueType
Monospace 821
12 Font ListFig.
The parameters have the following meaning :
Column Meaning
No. ID number of the font required for programming (command T).
Name Name with which the font is saved internally.
Type Type of font generation. It provides information on the variability of the font and is important when
programming (command T).
Description Explanations of the font: size, font family. The printout occurs in the appropriate font.
16 Parameters of
the Font listTable





5 Test Functions