38 38
5 Test Functions
5.11 Event Log
Function not available at A2+ !
Access only when service key is inserted!
The label printer saves the following events in the Event log:
Hardware fault
Printhead replacement with a change in resolution
Adjustment of the label sensor
Firmware updates
Resetting of the service counters
The printout occurs using the heat level and print speed specied in the Setup > Print param. menu.
Notice!
The printout occurs without taking the label gaps into consideration. This is why endless media are most
suitable for this purpose.
Insert service key into a USB master interface.
Insert printable medium (labels, endless paper) which extends across the entire printing width.
If the printout is to occur using thermal transfer printing, insert transfer ribbon with the maximum width.
Press the menu button.
Select Test > Event log print menu.
Start printout with the button.
Event log
Mach4/300 - 10/09/2007 -15:49:55
Firmware V3.11 (Aug 9 2007) - #111070553751
Bootloader V1.18 (May 29 2007)
Date/Time Description
23/05/2007/13:16:13 TPH-> 12dot/mm, 1248 dots
11/06/2007/07:51:24 Firmware upd. (V3.10 Jun 27, 2007)
11/06/2007/07:53:11 Adjust gap sensor: 1/3,14/85
23/08/2007/13:40:27 Firmware upd. (V3.11 Aug 9, 2007)
23/08/2007/15:41:28 PPP reload 3: 220907
20 Event logFig.
•
•
•
•
•
To Next Page
Loading...
Need help?
General
