51
9.6.4 Format Card
For external memory media only!
The Format card function can be used to delete all data from a memory medium. This reformats the memory
medium. This is why you can also use the Format card function if the Unknown card or Structural err. error
message was output when using the medium.
Unauthorized deleting of memory medium can be prevented by using a PIN ( "4.1.6" on page 20).
Insert memory medium ( "9.2" on page 47).
Press the menu button.
Select Memory card > Format card with the buttons } and |..
Press the button.
A selection eld with the selection No appears in the display.
Use the ~ and buttons to select Yes.
Press the button.
If the function Format card is protected via a PIN, use the buttons ~, , | and } to enter the code number and
conrm with the button.
The deleting procedure starts.
Do not remove the medium from the printer during the deleting procedure.
The memory volume of the medium is shown in the display as soon as the deleting procedure is complete.
Press any button.
9.6.5 ASCII Dump (Card)
The label les found on a memory medium consist of a sequence of printer commands. These command sequences
can be printed in the form of text with the ASCII dump (Card) function.
Insert printable medium (labels, endless paper) which extends across the entire printing width.
If the printout is to occur using thermal transfer printing, insert transfer ribbon with the maximum width.
Insert memory medium ( "9.2" on page 47).
Press the menu button.
Select the ASCII dump (Card) function in the Memory card menu.
Press the button.
The index of the memory medium is shown in the display.
Select the desired label le in the index of the medium with the ~ and buttons.
Start printout with the button.
The data printout is started after four lines are received. For this reason, it is often necessary to call up the last
few lines of a label description with the feed button.
The printout of the label description can be cancelled with the cancel button.
1.
2.
3.
4.
5.
6.
7.
8.
9.
1.
2.
3.
4.
5.
6.
7.
8.
9 Memory Media
To Next Page
Loading...
Need help?
General
