23
MENU DESCRIPTIONS
MAIN MENU SUB MENU DESCRIPTION
USERS The USERS menu is used to program remote controls.
Add User
Add User: To create a new user and assigned function (max. 250 users).
Mod. name
Mod. Name: To change a user number or existing name to another name.
Mod. code
Mod Code: To change a userʼs current code.
Related Func
Related Function: To change the function assigned to the user.
Remove Usr.
Remove User: To remove an existing user. Confirm the use you wish to remove with the ENTER button.
Delete all Usr
Delete all users: To cancel all registered users. Confi rm cancellation of all users with ENTER button.
Backup data
Backup data: To save the users in the memory roll. Confi rm saving of users on the memory roll with ENTER button.
Restore backup
Restore backup: To load the data saved on the memory roll onto card (if the card is of the same version it loads both users and
settings, otherwise it only loads the users).
INFO Info Menu
Version
Version: To view software version.
Number of gate runs: To view the number of runs performed by the operator.
Standby Mssg: To view the starting message, confirm with ENTER to change text. Use the ENTER button to move the cursor forward,
E
SC to move it backwards and <> to select the letter of number. Confirm the text by pressing the ENTER key for a few seconds.
System reset: Resets the system to the original factory settings. Press ENTER key to confirm.
TEST MOT. Motor Test Menu
TEST MOT.
MOT TEST.: The MOT test checks that gearmotors are rotating in the proper direction.
M1
: Gate leaf opening run of the first (M1) gearmotor. If the direction is wrong, invert the motorʼs p
hases.
M2: Gate leaf opening run of the second (M2) gearmotor. If the direction is wrong, invert the motorʼs p
hases.
PROGRAMMING
To Next Page
Loading...
Need help?
General
