What to do if my CAME Garage Door Opener opens but doesn't close?
If your CAME Garage Door Opener opens but doesn't close, check the N.C. safety contact (2-C1) to ensure it is not open and verify the proper direction of the door travel. You should also check the balancing of the overhead garage-door.
Why is my CAME Garage Door Opener transmitter not working?
If your CAME Garage Door Opener transmitter isn't working, check the bridging on the AF card, try cutting off the power and then powering it up again. If that doesn't work, try memorizing the transmitter again.
How to troubleshoot CAME Garage Door Opener that doesn't open or close?
If your CAME Garage Door Opener isn't opening or closing, check the power supply and line fuses. Also, verify that the (1-2) NC safety contact is not open.
Why is the POWER-ON alerting LED off on my CAME VER10?
If the POWER-ON alerting LED is off on your CAME Gate Opener, check the power supply and line fuses. Also, verify that the (1-2) NC safety contact is open.
What to do if the PROGRAMMING LED flashes rapidly on my CAME VER10 Gate Opener?
If the PROGRAMMING LED on your CAME Gate Opener flashes rapidly, it could be due to the N.C. safety contact (2-C1) being open or the encoder not working. Try cutting off the power to the control board and then powering it up again. Also, check the encoder connections to ensure they are correct.
How to fix a CAME Gate Opener transmitter that is not working?
If your CAME Gate Opener's transmitter isn't working, try checking the bridging on the AF card by cutting off the power and then powering it up again. If that doesn't work, try memorizing the transmitter again.
General| Brand | CAME |
|---|---|
| Model | VER10 |
| Category | Gate Opener |
| Language | English |
Checks and preparations before starting the installation process.
Instructions and precautions during the installation phase.
Guidelines for users regarding operation and safety.
Specifies the maximum limits for door dimensions and weight.
Detailed technical specifications of the operator.
Identifies and lists the main components of the operator.
Details the components of the traction guide system.
Lists available accessories for the operator.
Specifies required cable types and sizes for connections.
Diagram showing the typical installation layout of components.
Step-by-step instructions for assembling the traction guide.
Steps for securely attaching the traction guide.
Procedure for attaching the transmission arm to the door.
Explains how to connect various command and control devices.
Instructions for connecting signaling devices like flashing lights.
Explains the function of DIP switches for programming.
Guide to adjusting trimmers for sensitivity and timing.
Explains how the encoder detects obstructions and operates.
Instructions for installing the mechanical stop for opening.
Steps to position and fasten the mechanical stop.
Procedure for setting the door's limit positions.
Procedure to memorize the door's closing position.
Procedure to memorize the door's opening position.
Steps to program a partial opening function for the door.
Configure slow start for the door when opening.
Configure slow-down for the door during closing.
Instructions for installing and activating the radio control system.
How to activate a transmitter for sequential command.
How to activate a transmitter for partial opening.
Procedure to erase all programmed transmitters.
Procedure to manually lock the operator.
Logging extraordinary maintenance jobs performed by contractors.
To Next Page
