10 11 ES TS 1 2 3 3P 4 5 7 CX CY CZ 10 11 ES TS 1 2 3 3P 4 5 7 CX CY CZ
DELTA
N.O.
N.C.
C.
+
-
+
-
&53)"),%M!
48
48
48
#
.#
DIR /
DELTA S
A B GND
A B GND
UTP CAT 5
1 2 3 4
1 2 3 4
RSE
Page
8 - Manual code:
FA00321-EN vers.
1 02/2017 © CAME S.p.A. - The data and information shown in this manual are to be considered subject to change at any time and without the need for any advance warning.
Serial connection of RS485
with the RSE card to the home
automation system via CRP
(Came Remote Protocol).
Insert the RSE card.
Connecting with Came Remote Protocol (CRP)
Connecting the safety devices (safety test)
At each opening and closing command, the control board assesses the efficiency of the safety devices (e.g. photocells). Any anomaly found
inhibits any command.
From the [Safety Test] function, choose the input to be turned on from CX, CY or CZ.
To Next Page
Loading...
