CAME ZM3ES - User and Code Management Procedures; Procedure for Entering a New User; Procedure for Modifying User Names

ACCESS CONTROL
Page
14
14 - Manual code:
FA00321-EN
FA00321-EN vers.
1
1 02/2017 © CAME S.p.A. - The data and information shown in this manual are to be considered subject to change at any time and without the need for any advance warning.
2. Select
[Confirm?(yes)]
and press ENTER to
confirm.
1. From the
[USERS] menu,
select [Add User].
Press ENTER to
confirm.
4. ... you will be asked
to input a code.
Send the code from
the transmitter using
the swipe card or the
transponder.
5. Once the code has
been entered, the
user name will come
up showing the type
of command that was
saved...
6. ... or if the code has
already been entered,
[Existing code] will
appear.
3. Choose the
function to assign to
the user. Press ENTER
to confirm...
1. From the
[USERS] menu,
select [Change
Name]. Press
ENTER to confirm.
2. Choose the user
number or name
you wish to change
and press ENTER to
confirm.
4. Confirm by pressing
the ENTER key and
holding for a few
seconds.
3. Use the ENTER key
to move the cursor
forward, ESC to move
it backwards and <>
to select the letter or
number.
Entering a new user
Modify user name
< Add User >
Add User
<Confirm?(yes)>
Assoc Function
< 2-7 >
Wait for code
>>>>>>
--001--
Radio
Existing code
001: --U001--
< Change Name >
Select user
< 001: --U001-- >
Change Name
--001--
Change Name
JOHN----