CAME ZM3ES - Programming Interface and Basic Settings; Description of Setting Commands

{
{
{
{
Page
9
9 - Manual code:
FA00321-EN
FA00321-EN vers.
1
1 02/2017 © CAME S.p.A. - The data and information shown in this manual are to be considered subject to change at any time and without the need for any advance warning.
The ENTER key is for:
- entering the menu;
- confirming and saving the values set.
The ESC key is for:
- exiting the menu;
- cancelling modifications.
The < > keys are for:
- shifting from one menu item to another;
- increasing or decreasing values.
The <...> symbols on the display are for:
- pointing out the currently selected item
PROGRAMMING
Description of setting commands
To enter the menu, press and hold
the ENTER key for at least one
second.
To select a menu item,
use the arrow keys...
...then press ENTER
also use the arrow keys
for the submenus...
If the arrows <> are on the
[Cycle Time] function, you may
modify the value .
To increase or decrease a value,
use the arrow keys...
...then press ENTER to confirm...
...to exit the menu, wait 30 seconds,
or press ESC, until the start screen
is displayed.
...then press ENTER
< TIMING ADJ >
LANGUAGE
< English >
FUNCTIONS
Imp. Run
< A.C.T. >
< Cycle Time >
90s.
Cycle Time
< 90s. >
Cycle Time
< 100s. >