Canon EOS 50 E - 4.4 SHUTTER ADJUSTMENT

Part 3: Repair Information
4.4 SHUTTER ADJUSTMENT
PuRPOSE:
To adjust shutter speeds. If the maximum shutter speed ( 1 / 4000sec) is within the
limits all shutter speeds have been adjusted.
STANDARD:
Shutter speed standard
Marked shutter speed:
Exposure time:
Limits:
1/4000
0.290ms
0191 - 0.440ms
r------ ---- ---- -- -- ----- -- ---- ------ - -- - ---------- ------ -- - - -- ------ ------- --- -- ----- ------ ---- - -- ----------- --- -- ---------,
j
1111111
L- fitttlj•MMN Check that the shutter curtain travel times conforms to the standard. If not.adjust the !
1111110
2nd curtain travel time.If the 1st curtain is not within limits, replace the shutter unit.
Shutter curtain travel time standard
First curtain travel time: 4.8 ± 0.2ms
Second curtain travel time: 4.8 ± 0.2ms
--------------------------------------------------------------------------------------------------------------------------------------------------------.J
To01.s:
Personal computer RS-232C cable HS-1/F
Adjustment software (stored on a work disk)
EF-8000 EF50mm f / l .8 production lens
PREPARATION:
1) Start adjustment program, connect the camera to the computer through the HS-
1/F, and select (Fl) Shutter Adjustment on the menu screen.
2) Attach the EF50mm f I l .8 production lens to the camera, set 1V and AV to 4000
and f /l.8 respectively in the manual mode, and set the camera on the EF-8000.
Set the EF-8000 to shutter speed mode.
EF-8000
Attach EF50mm f/1.8 lens
Fig. 3-46 Shutter Speed Adjustment
3-40