1 Click Start, select Settings, and then Control Panel.
2 Double-click the Infrared icon.
3 Click the Options tab.
4 Select the Enable infrared communication check box (or select the Enable infrared
communication on: check box).
5 Click the OK button.
Note In Windows 95
Check the connection speed (do not select the check box).
When the connection speed is set to 4 Mbps, operation of the printer may become unstable
depending on the type of your computer. In this case, check the Limit connection speed
to: check box and click
to select 115.2kbps.
The printer port status is wrong. (Windows Me/Windows 98/Windows
95)
Check the printer port status.
1 Right-click My Computer and select Properties.
2 On the Device Manager sheet, click Port (COM/LPT) (or Port (COM&LPT)) and double-
click Virtual infrared LPT port (or Infrared printer (LPT) port).
3 Check whether any device problem is displayed on the General (or Information) sheet.
If any device problem is displayed, refer to your Windows documentation.
The printer port setting is wrong.
When printing from the computer through infrared transmission, check whether the IR port is selected as the
printer port ( LPT3 port in Windows Me, Windows 98, or Windows 95). If another port is selected, the
printer may malfunction.
1 Open the Printer Properties dialog box of the printer driver.
See Opening the Printer Properties dialog box directly from the Start menu
2 Click the Ports tab (or Details tab) to check the settings.
To Next Page
