T-Shirt Transfers TR-201
This paper is used to create iron-on transfers. The image is printed backwards when Media Type is set to T-Shirt
Transfer in the printer driver.
Loading
If the T-shirt Transfer is curled, flatten it by curling it in the opposite direction.
Load the paper with the side that does not have green lines facing up.
Load only one sheet at a time.
Set the paper thickness lever to the right.
Printer Driver Settings
Media Type: T-Shirt Transfer
Page Size: Ensure the setting matches the size set in the application.
Handling of Printed Output
Remove each T-shirt transfer as soon as it is printed.
The T-shirt Transfer should be used as soon as possible. Refer to the supplied instructions for details on
how to use the paper.
Printable Area
See Printing Area
To Next Page
