paper loaded in the printer.
Print the nozzle check pattern to ensure that the ink is ejected correctly.
If the nozzle check pattern does not print correctly, clean the print head.
Refer to your Quick Start Guide for instructions on how to print a nozzle check pattern.
If the problem is not resolved after cleaning the print head several times, replace either of ink tanks. If print
quality still remains poor, the print head may be worn out. Contact the Customer Care Center.
Ensure you are printing on the correct side of the media.
You can only print on one side of certain media.
Straight Lines are Misaligned
Align the print head.
1 Open the Printer Properties dialog box.
See Opening the Printer Properties dialog box directly from the Start menu
2 Click the Maintenance tab.
3 Click Print Head Alignment.
Follow the instructions on the screen.
1 Open the Page Setup dialog box.
See Opening the Page Setup Dialog Box
2 Click Utilities.
3 Select Test Print from the pull-down menu, and then click Print Head Alignment.
Follow the instructions on the screen.
In the printer driver settings, select a higher Print Quality setting.
1 Open the Printer Properties dialog box.
See Opening the Printer Properties dialog box from your application program
2 On the Main tab, click High for the Print Quality setting.
To Next Page
