1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to
select the Paper tab ( ).
Note
• If the Tab Selection screen is not displayed, press the Menu button.
2
Press the OK button.
The Paper Menu is displayed.
3
Press ▲ or ▼ to select Eject Paper, and then press the OK button.
4
Press ▲ or ▼ to select Yes, and then press the OK button.
The roll is now rewound and ejected.
Caution
•
If you have selected ManageRemainRoll > On in
the Control Panel menu, a barcode is printed on
the leading edge of the roll.
Do not remove the roll before the barcode is prin-
ted. You will be unable to keep track of the amount
of roll paper left. (See "Keeping Track of the Amount of Roll Paper Left.") ➔ P.349
5
Positioning your hands as shown, open the Roll Cov-
er.
6
Using both hands, rotate the Roll Holder toward the back
to rewind the roll.
Removing the Roll from the Printer
iPF785
User's Guide
Handling and Use of Paper Handling rolls
346
To Next Page
Loading...
Need help?
General
Weight and Dimensions
