EasyManuals Logo

Canon imageprograf IPF785 User Manual

Canon imageprograf IPF785
640 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #89 background imageLoading...
Page #89 background image
Printing Vertical or Horizontal Banners (Large-Format Printing; Windows)
Printing Vertical or Horizontal Banners (Large-Format Printing; Windows)
By automatic enlargement of a document created with an application software by the printer driver, you can print
maximum 18.0 m vertical or horizontal banners.
However, you may not be able to print 18.0 m due to restrictions in the settable document size according to the
application software.
This topic describes how to print a banner about five times as long as the roll width based on the following exam-
ple.
Document: A horizontal banner created in Microsoft Word
Page size: Non-standard (100×500 mm [3.9×19.7 in])
Paper: Roll
Paper type: Plain Paper
Roll paper width: 16 in (406.4 mm)
The print procedure is as follows.
1.
Register a Custom Paper Size in the printer driver.
Call a non-standard paper size registered in the printer driver with Custom Paper Size.
Once you register Custom Paper Size, you then can select it repeatedly from the paper size list.
Custom Paper Size can be set up to 18.0 m.
2.
In the application, create an original in the size you registered.
3.
Print the banner, using the settings that correspond to banners.
Registering a Custom Paper Size
This example describes how to register a paper size that is horizontally elongated and suitable for banners in either
horizontal or vertical format.
1
Display the printer driver dialog box. (See "Accessing the Printer Driver Dialog Box from the Operating Sys-
tem Menu .") P.149
2
Click the Page Setup tab to display the Page Setup
sheet.
3
Select and click a roll paper in the LPaper Source list.
4
Click OSize Options to display the Paper Size Options dialog box.
5
Enter a desired paper name in Custom Paper Size Name. My Horizontal Banner is used in this example.
6
In Units, click mm.
7
Under Paper Size, enter 100 in Width and 500 in Height.
8
Click Add to add the paper size of My Horizontal Banner.
9
Click OK to close the Paper Size Options dialog box.
iPF785
Printing Vertical or Horizontal Banners (Large-Format Printing; Windows)
User's Guide
Enhanced Printing Options Printing banners or at other non-standard sizes
89

Table of Contents

Other manuals for Canon imageprograf IPF785

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canon imageprograf IPF785 and is the answer not in the manual?

Canon imageprograf IPF785 Specifications

General IconGeneral
ColorYes
Printing colorsBlack, Cyan, Magenta, Matte black, Yellow
Print technologyInkjet
Maximum resolution2400 x 1200 DPI
Page description languagesGARO, HP-GL/2, HP-RTL
Media thickness0.07 - 0.8 mm
Maximum print size-
Media width (rolls)254 - 914.4 mm
Media width (sheets)203.2 - 914.4 mm
Maximum roll diameter150 mm
Paper tray media typesCoated paper, Cut sheet, Pre-Printed, Roll
ISO A-series sizes (A0...A9)A0, A1, A2, A3
ISO B-series sizes (B0...B9)B1, B2, B4
USB connectorUSB Type-A
USB 2.0 ports quantity1
Ethernet LAN data rates10/100/1000 Base-T/TX Mbit/s
Ethernet interface typeGigabit Ethernet
CertificationRoHS
Product colorBlack, Grey
Storage mediaHDD
Internal memory256 MB
Internal storage capacity320 GB
Sound pressure level (printing)48 dB
Compliance industry standardsIEEE 802.3ab, IEEE 802.3u, IEEE 802.3
Power consumption (standby)0.5 W
Power consumption (typical)140 W
Storage temperature (T-T)15 - 30 °C
Operating relative humidity (H-H)20 - 80 %
Sustainability certificatesENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Depth877 mm
Width1304 mm
Height1062 mm

Related product manuals