Messages regarding printing or adjustment
Messages regarding printing or adjustment
Cannot adjust printhead. ..............................................................................................................................................611
Borderless printng not possible. ............................................................................................................................... 606
Cannot adjust paper feed. ........................................................................................................................................... 610
Check printed document. ............................................................................................................................................ 610
Cannot adjust paper feed.
Cannot adjust paper feed.
Cause Corrective Action
The Printhead nozzles are clogged. Execute Adj. Quality again, as follows.
1.
Press the OK button to clear the error.
2.
Print a test pattern to check the nozzles.
(See "Checking for Nozzle Clogging.") ➔ P.544
3.
Clean the Printhead if the nozzles are clogged.
(See "Cleaning the Printhead.") ➔ P.545
4.
Execute Adj. Quality again.
(See "Automatic Banding Adjustment.") ➔P.528
Highly transparent film is loaded that cannot be
used for automatic feed amount adjustment.
Press the OK button to clear the error, and then adjust the feed amount manually.
(See "Manual Banding Adjustment.") ➔ P.529
Check printed document.
Check printed document.
Cause Corrective Action
The Printhead nozzles are becoming clogged. If printing is faint, clean the Printhead.
(See "Cleaning the Printhead.") ➔ P.545
Cannot adjust paper feed.
iPF785
User's Guide
Error Message Messages regarding printing or adjustment
610
To Next Page
Loading...
