Other problems
Other problems
The Ink Tank Cover has become detached from the printer ....................................................................... 593
The printer does not go on ......................................................................................................................................... 593
The printer takes time to start up ............................................................................................................................593
If the Printer Makes a Strange Sound .................................................................................................................... 594
Messages advising to check the maintenance cartridge are not cleared .............................................. 594
The printer consumes a lot of ink ............................................................................................................................ 594
Ink Level Detection ......................................................................................................................................................... 594
The Ink Tank Cover has become detached from the printer
The Ink Tank Cover has become detached from the printer
Cause Corrective Action
The Ink Tank Cover became detached from the printer because too much
force was applied to the Ink Tank Cover.
Attach the Ink Tank Cover to the printer.
(See "Attach the Ink Tank Cover to the printer.") ➔ P.542
The printer does not go on
The printer does not go on
Cause Corrective Action
The printer is unplugged. Plug the power cord into the outlet, and then turn on the printer.
The specified voltage is not supplied. Check the voltage of the outlet and breaker.
(See "Specifications.") ➔P.620
The printer takes time to start up
The printer takes time to start up
Cause Corrective Action
The printer may have shut down incorrectly last time. This may hap-
pen after power outages or if the printer is unplugged before it is
turned off.
In this case, the next time power is restored, the printer's hard disk is
checked, and startup may take some time.
Please wait a while, because it may take several minutes to
finish checking the hard disk.
If an error message is displayed after the hard disk check,
follow the instructions indicated to resolve the problem.
iPF785
The Ink Tank Cover has become detached from the printer
User's Guide
Troubleshooting Other problems
593