Note
• For details, refer to the imagePROGRAF Status Monitor help.
Job Management Using imagePROGRAF Status Monitor
Job Management Using imagePROGRAF Status Monitor
You can use the Job sheet in imagePROGRAF Status Monitor for operations such as pausing and canceling print
jobs.
•
Preempting Other Jobs
If you select a print job and click the Preempt Other Jobs button, the selected job is printed ahead of the job
that currently precedes it in the print queue.
•
Pausing/Resuming Print Jobs
Selecting a print job and clicking the Pause button pauses printing of the selected job.
To resume printing of a paused print job, select the print job and click the Resume button.
Note
• Once all the print data for a print job has been sent to the printer, the job can no longer be paused/resumed.
•
Canceling Print Jobs
Selecting a print job and clicking the Cancel Job button cancels printing of the selected job.
Note
• You cannot cancel other users' print jobs.
•
Printing Held Jobs
Printing of the job with a Status of Holding is paused because the paper specified by the driver does not
match the paper currently loaded in the printer.
Use the procedure below to print the held job.
1
Select the held job and click the Replace Paper button.
2
Replace the paper in the printer with the correct paper.
Note
• To continue printing without changing the paper in the printer, select the held job and click Continue to print
button.
• The printing behavior when the paper specified by the driver does not match the paper currently loaded in the
printer can be changed by using Detect Mismatch in the operation panel menu. Refer to "Menu Settings" ➔ P.416
for details.
iPF785
Job Management Using imagePROGRAF Status Monitor
User's Guide
Print Job Management Status Monitor (Windows)
467
To Next Page
Loading...
Need help?
General
Weight and Dimensions
