3
Enter the Roll Paper Width and Length of the paper, as well as the Price for the configured length.
4
Click the Add button to return to the Paper sheet.
5
To change the unit cost of a media type that has already been configured, click the Overwrite button.
6
Click the OK button.
Important
• If you do not set the standard prices, you cannot set the price for each roll paper.
• If the Roll Paper Width is set to the same value as the Width of the paper configured in the standard prices, the
cost is calculated using the price configured in the Roll Paper Width Settings dialog box.
• The settings are not applied until you click the OK button.
Setting the Unit Cost for Items Other Than Ink and Paper
Setting the Unit Cost for Items Other Than Ink and Paper
Open the Other sheet. Use this sheet to set any price for items other than inks and paper.
1
Enter any name in the Name field.
2
Enter a value in Unit Cost.
3
Use Allocated to specify whether the costs are allocated as being incurred by the print job.
4
Click the Add button. To change the unit cost for a media type you have already set, click the Overwrite
button.
5
Click the OK button.
Important
• Your settings are not applied until you click the OK button.
iPF785
Setting the Unit Cost for Items Other Than Ink and Paper
User's Guide
Print Job Management Accounting (Windows)
477
To Next Page
Loading...
Need help?
General
Weight and Dimensions
