Canon imageprograf IPF785 User Manual

Other Messages
Other Messages
GARO Wxxxx (x represents a number) .................................................................................................................. 617
ERROR Exxx-xxxx (x represents a letter or number) ....................................................................................... 617
Hardware error. xxxxxxxx-xxxx (x represents a letter or number) ............................................................. 617
Top cover is open. ........................................................................................................................................................... 618
Prepare for parts replacement. ................................................................................................................................. 618
Parts replacement time has passed. ....................................................................................................................... 618
Unknown le. ..................................................................................................................................................................... 618
Multi-sensor error ........................................................................................................................................................... 618
Error in cutter position. .................................................................................................................................................618
GARO Wxxxx (x represents a number)
GARO Wxxxx (x represents a number)
Cause Corrective Action
There is a problem with the print job. Try printing again, using the correct printer driver.
It is also possible to continue printing in this state.
However, you may not be able to obtain the desired printing results.
ERROR Exxx-xxxx (x represents a letter or number)
ERROR Exxx-xxxx (x represents a letter or number)
Cause Corrective Action
An error requiring service may have occurred. Write down the error code and message, turn off the printer, and contact your Can-
on dealer for assistance.
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
Cause Corrective Action
The last portion of roll paper was used during a print job. The paper
was not advanced because the trailing edge is taped to the roll.
Turn off the printer and remove the roll from the printer before
restoring power.
Fastening tape or the Belt Stopper has not been removed inside
the Top Cover.
Turn off the printer, open the Top Cover and remove the tape
or the Belt Stopper before restoring power.
An error requiring service may have occurred. Turn off the printer and wait at least three seconds before re-
storing the power.
If the message is displayed again, write down the error code
and message, turn off the printer, and contact your Canon
dealer for assistance.
Hardware error. 03130031-2F7x (x is 0, 1, or 2)
Cause Corrective Action
The ink tank is not
installed correctly.
Turn off the power, remove and then reinstall all of the ink tanks, and then turn on the power.
If the same message is displayed again, write down the error code and message, turn off the printer, and
contact your Canon dealer for assistance. (See "Replacing Ink Tanks.") ➔ P.536
iPF785
GARO Wxxxx (x represents a number)
User's Guide
Error Message Other Messages
617

Canon imageprograf IPF785 Specifications

General

Color	Yes
Printing colors	Black, Cyan, Magenta, Matte black, Yellow
Print technology	Inkjet
Maximum resolution	2400 x 1200 DPI
Page description languages	GARO, HP-GL/2, HP-RTL
Media thickness	0.07 - 0.8 mm
Maximum print size	-
Media width (rolls)	254 - 914.4 mm
Media width (sheets)	203.2 - 914.4 mm
Maximum roll diameter	150 mm
Paper tray media types	Coated paper, Cut sheet, Pre-Printed, Roll
ISO A-series sizes (A0...A9)	A0, A1, A2, A3
ISO B-series sizes (B0...B9)	B1, B2, B4
USB connector	USB Type-A
USB 2.0 ports quantity	1
Ethernet LAN data rates	10/100/1000 Base-T/TX Mbit/s
Ethernet interface type	Gigabit Ethernet
Certification	RoHS
Product color	Black, Grey
Storage media	HDD
Internal memory	256 MB
Internal storage capacity	320 GB
Sound pressure level (printing)	48 dB
Compliance industry standards	IEEE 802.3ab, IEEE 802.3u, IEEE 802.3
Power consumption (standby)	0.5 W
Power consumption (typical)	140 W
Storage temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	20 - 80 %
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	877 mm
Width	1304 mm
Height	1062 mm