Canon imageprograf IPF785 User Manual

Installing Ink Tanks
1
Before opening the pouch, gently agitate the Ink Tank once or
twice. Agitate the ink in the Ink Tank by slowly rotating the Ink
Tank upside-down and right side up repeatedly.
Important
• After installing an ink tank, do not remove and shake it. Doing so may cause the ink to leak out.
• If you do not agitate the Ink Tank, the ink may settle, which may affect printing quality.
2
Open the pouch and remove the Ink Tank.
Important
• Never touch the ink holes or electrical contacts. This may cause stains, damage the Ink Tank, and affect
printing quality.
3
Press the OK button and install the Ink Tank into the holder as
shown, with the ink holes facing down.
Important
•
Ink tanks cannot be installed in the holder if the color or ori-
entation is incorrect.
If the Ink Tank does not fit in the holder, do not force it in.
Check the Ink Tank serial number, the Ink Color Label, the
color of the Ink Tank, and the orientation of the Ink Tank be-
fore reinstalling it.
Forcing the Ink Tank into the holder may damage the print-
er.
iPF785 Replacing Ink Tanks
User's Guide
Maintenance and Consumables Ink Tanks
539

Canon imageprograf IPF785 Specifications

General

Color	Yes
Printing colors	Black, Cyan, Magenta, Matte black, Yellow
Print technology	Inkjet
Maximum resolution	2400 x 1200 DPI
Page description languages	GARO, HP-GL/2, HP-RTL
Media thickness	0.07 - 0.8 mm
Maximum print size	-
Media width (rolls)	254 - 914.4 mm
Media width (sheets)	203.2 - 914.4 mm
Maximum roll diameter	150 mm
Paper tray media types	Coated paper, Cut sheet, Pre-Printed, Roll
ISO A-series sizes (A0...A9)	A0, A1, A2, A3
ISO B-series sizes (B0...B9)	B1, B2, B4
USB connector	USB Type-A
USB 2.0 ports quantity	1
Ethernet LAN data rates	10/100/1000 Base-T/TX Mbit/s
Ethernet interface type	Gigabit Ethernet
Certification	RoHS
Product color	Black, Grey
Storage media	HDD
Internal memory	256 MB
Internal storage capacity	320 GB
Sound pressure level (printing)	48 dB
Compliance industry standards	IEEE 802.3ab, IEEE 802.3u, IEEE 802.3
Power consumption (standby)	0.5 W
Power consumption (typical)	140 W
Storage temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	20 - 80 %
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	877 mm
Width	1304 mm
Height	1062 mm