LASER CLASS 730i/720i/710 Chapter 4: Maintenance and Service
4-20
c) ERROR CODE LIST
The error codes that have newly been added starting with the product are identified by the
notation “New”; those error codes for which remedies unique to the product are offered are
identified by the notation “UNQ (UNIQUE)”.
• User error code
No. Tx or Rx Definition
UNQ #0001 [TX ] Document has jamed
UNQ #0003 [TX/RX] Document is too long, or page time-over
UNQ #0005 [TX/RX] Initial identification (T0/T1) time-over
#0006 [TX ] Transmission cannot be made
[RX ] Phase synchronization fails in OLD-FM
#0008 [TX ] Password does not match for polling transmission
UNQ #0009 [RX ] Recording paper has jamed or the recording paper has run out
#0011 [RX ] Polling reception error
#0012 [TX ] The other party has run out of recording paper
#0018 [TX/RX] Auto dialing transmission error
#0021 [RX ] The other party has rejected the machine during polling
reception
#0022 [TX ] Call fails
#0025 [TX/RX] Auto-dial setting is wrong
#0033 [TX ] Confidential transmission cannot be used
#0034 [TX ] Transmission to the confidentical mailbox of the other party
cannot be made in confidential transmission
#0035 [TX ] Relay control transmission cannot be used
#0036 [TX ] Relay control transmission cannot be made
#0037 [RX ] Memory has overflowed when receiving images
#0039 [TX ] Closed network transmission fails
#0054 [TX/RX] Call cannot be made
#0056 [RX ] Recording paper feed fault
#0057 [RX ] Recording paper feed fault
#0058 [RX ] Recording paper feed fault
#0059 [TX ] Dialed number and the connected number (CSI) do not match
#0080 [TX ] The other party is not equipped with an ITU-T-compliant
subaddress reception function
#0081 [TX ] The other party is not equipped with an ITU-T-compliant
password reception function
#0082 [RX ] The other party is not equipped with an ITU-T-compliant
selective polling transmission function
#0083 [RX ] Selective polling address or the password does not match
during ITU-T-compliant selective polling reception
#0084 [RX ] The other party is not equipped with a password function
for ITU-T-compliant selective polling reception
#0099 [TX/RX] Stop button was pressed during a communication
#0995 [TX/RX] Memory transmission reservation clear/memory reception
image clear
To Next Page
Loading...
