5-4
LASER CLASS 730i/720i/710 5.GUIDE TO REPLACEMENT
See Page
2-45
See Page
2-81
See Page
2-47
FIGURE 41-a
FIGURE 23-a
FIGURE 24-a
Bend the 2 claws as indicated by the arrows, and remove
the arm.
When attaching the separation roller (upper), after hooking
the roller gear on the belt, pass it over the shaft.
To remove the lifting plate, be sure first to remove the left
and right edge covers; then, while spreading the left and
right claws outward, lift it to detach.
Belt
Gear
Separation roller (upper)
Left Edge Cover
Right Edge Cover
Claw
Claw
Lifting Plate
FIGURE 22-a
See Page
2-43
Attach the belt as shown in the diagram.
manuals4you.commanuals4you.com
To Next Page
Loading...
