How to feed an original
Introduction
When you want to copy or scan, it is important to correctly feed the original in the printer.
IMPORTANT
• The scanner can not scan an original that is thicker than 0.8 mm or rigid originals. When you
use the carrier sheet that is available as an option, ensure that the combined thickness of both
the document and carrier sheet does not exceed 0.8 mm. For more information, see
How to
use the carrier sheet
on page 146.
• Do not retrieve the original from the printer when it is already fed into the scanner. To release
the original press the stop button on the user panel and tap [Release the original] under the
Smart Access.
Procedure
1.
Feed the original face up and centered on the original feeding table.
2.
The scanner takes the original.
The width of the original is automatically detected and displayed in the Smart Access. The live
scan view displays the scanning process.
Result
Depending on the selected [Original release mode] in Océ Express WebTools, the scanner holds
or releases the original after the scan procedure. Tap [Release the original] under the Smart
Access to let the scanner release the document.
When the original is released, you can feed the next original.
How to feed an original
144
Chapter 4 - Use the Printing System
To Next Page
Loading...
