Fold delivery destination
Introduction
The actual fold delivery destination can vary depending on the media weight, the selected folding
package and fold delivery, and the printer output length.
NOTE
• It is not possible to fold when the printer output length is smaller than 0,276m.
• The output length sizes that result in the delivery destination listed below, are based on the
default values for the maximum folding length settings ([Maximum sheet length for first fold]
is 2m; [Maximum sheet length for second fold] is 6m).
For more information on the maximum folding length settings, see
Set the maximum folding
length
on page 221.
Media 60 grams
[Folding pack‐
age]
[Fold delivery] Output
length
Actual delivery destination
[Full fold] [Stacker] or
[Belts].
< 1.22 m Delivered on stacker or belt.
1.22 m - 2 m Delivered on stacker or belt.
Possible paper jam.
2 m - 6 m Delivered in first fold delivery
> 6 m Length known at start.
Unfolded, delivered in top delivery tray.
> 6 m Length not known at start.
Possible paper jam.
[First fold only] [First fold output] < 1.22 m Delivered in first fold delivery.
1.22 m - 6 m Delivered in first fold delivery.
Possible paper jam.
> 6 m Length known at start.
Unfolded, delivered in top delivery tray.
> 6 m Length not known at start.
Possible paper jam.
Media 75 grams
[Folding pack‐
age]
[Fold delivery] Output
length
Actual delivery destination
[Full fold] [Stacker] or
[Belts].
< 2 m Delivered on stacker or belt.
2 m - 6 m Delivered in first fold delivery
> 6 m Length known at start.
Unfolded, delivered in top delivery tray.
> 6 m Length not known at start.
Possible paper jam.
4
Fold delivery destination
Chapter 5 - Use the Folder
219
To Next Page
Loading...
