Canon Oce PlotWave 450 - Make a Copy of a Dark Original (Diazo)

Make a copy of a dark original (Diazo)
Introduction
It can be difficult to make a good copy of a Diazo original. Diazo originals have a changing
lightness with a 'cloudy' background, which can give an unclear output. The Océ PlotWave
450/550 has a special [Diazo] preset, that follows the lightness and changing background of the
original and copies to an even and high quality output.
Before you begin
Use the [Diazo] mode for originals that have a changing 'cloudy' background.
Dark and light Diazo originals, or other light or dark originals with a changing background can be
copied in [Diazo] mode.
Procedure
1.
Feed the original face up and centered on the original feeding table.
2.
Tap the copy tile. A window with a list of presets opens.
3.
Tap the [Image] preset.
4.
Tap [Diazo].
5.
Define the number of copies and tap the green button.
Make a copy of a dark original (Diazo)
190
Chapter 4 - Use the Printing System