5-22
Restore Settings
All settings of the camera, except for the date and time, are initialized.
Note
If the reset switch is pushed, the settings will be initialized including the camera's IP address,
subnet mask, default gateway address and other network settings. Accordingly, you can no
longer operate the camera from the PC you were using to connect to the camera before. When
initializing the camera, use [VB Initial Setting Tool v5.0.1] installed in your PC to set an IP
address appropriate for the environment in which the camera is used. See "Perform Initial
Setting of the Camera" (Start Guide).
VB
-
C500VD VB
-
C500D
Reset Switch
Reset Switch
To Next Page
Loading...
