Canon VB-C500VD - Precautions for Installation

xiv
Safety Precautions
Precautions for Installation
Warning
Do not install the product in the following places:
• Place receiving strong direct sunlight, near heat generating objects, or subject
to high temperature
• Place near fire sources or flammable solvents (alcohol, thinner, etc.)
• Humid or dusty place
• Place subject to lamp black or steam
• Place subject to sea wind
• Narrow, sealed place
Fire or electric shock may result.
Note
For installation or inspection of the VB-C500VD/VB-C500D, consult/request the
store where you purchased the product.
• Wire the VB-C500VD/VB-C500D power supply, network, or other cables safely
and securely according to the relevant regulations such as technical standards
for electrical installations.
• When installing the VB-C500VD/VB-C500D, select a ceiling surface, etc.,
capable of withstanding the total weight of the camera and all options used
(Recessed Mounting Kit), provide sufficient reinforcements and use the
bundled safety wire if necessary.
• To prevent injuries and equipment damage due to falling items, periodically
check the brackets and screws for rusting and loosening.
• Do not install the VB-C500VD/VB-C500D to the place with strong vibration.
• Do not install the VB-C500VD/VB-C500D on the uneven, inclined, or other
unstable surface.
• (VB-C500VD) Do not install the network camera to the place where is not
strong enough or where is easily affected by vibration. Otherwise, the vandal
resistant feature may not be made the best use of.
Malfunction may result.