Canton Smart Sounddeck 100 User Manual

18
English
Using Spotify Connect
Use your phone, tablet or computer as a remote control for Spotify. Go to spotify.com/connect to learn how.
Automatic Updates
After being connected to a network and getting access to the Canton Update Server via the Internet, the Sounddeck 100 automatically per-
forms firmware updates. Each time the Sounddeck 100 is connected to the mains, and at regular intervals (also in standby) it searches for a
firmware update and installs it, if available. The LED flashes red/green during the update process, and the display shows "DOWNLOADING"
followed by"UPDATING". During this time the system is not ready for operation.
Caution: Do not disconnect the Smart Sounddeck 100 from the power supply during an update process!
Note: If you do not wish to setup your Sounddeck 100 using the Google Home app, please connect your Sounddeck 100 permanently or
temporary at regular intervals with your network router using an ethernet cable to keep your Sounddeck 100 always updated.

Canton Smart Sounddeck 100 Specifications

General

Audio decoders	Dolby Atmos
RMS rated power	- W
Audio output channels	- channels
Audio Return Channel (ARC)	Yes
Wi-Fi	-
HDCP version	2.2
HDMI ports quantity	4
Connectivity technology	Wired
Product color	Black
Wall mountable	No
Audio formats supported	DTS

Weight and Dimensions

Width	- mm
Soundbar weight	- g