Canton Smart Sounddeck 100 User Manual

3
25
English
Sleep Timer [SLP]
If this function is enabled, the system shuts down to standby mode after a specified time. You can select 15, 30, 45 or 60 Minutes.
If the value OFF is selected, the function is disabled.
To adjust the shut down time, please follow the next steps:
1
To enter the menu, press the "M" button.
2
Use the " " or " " button to navigate into the menu System Setup [SYS] and confirm with the "OK" button.
3
Confirm the first menu item Sleep Timer [SLP] by pressing the "OK" button.
4
Select the desired time using the + or – keys.
5
Press the "M" button to exit this menu item.
Note: The Sleep Timer will be disabled automatically after a power down. That means the shut down time must be selected again after every
power up sequence in order to use this function.
IR Menu [IRM]
This menu includes all functions relevant for the infrared operation of the Sounddeck. It consists of three submenus.
IR Learn [IRL]
The system can learn the infrared codes of your TV or universal remote control and therefore allows you to control the functions of the
Sounddeck 100 and your TV via one remote control. You can allocate any key of the TV or universal remote control to your Sounddeck
100. When choosing a key, make sure that the instructions for the Sounddeck do not conflict with the TV.
To learn the IR codes of a third party remote, hold the TV remote control in position and do the following steps:
1
To enter the menu, press the "M" button.
2
Use the " " or " " button to navigate to the menu System Setup [SYS] and confirm with the "OK" button.
3
Select the IR Menu [IRM] by using the " " or " " buttons and press the "OK" button to confirm.
4
Confirm the first menu item IR Learn [IRL] by pressing the "OK" button.
5
IRL is flashing in the display. On the screen "Press the key you want to learn" is displayed.
6
Press the wanted function on the Canton Smart remote control, e.g. “+” for Volume +.
7
Now the display shows the chosen function, e.g. “V+” resp. "Please press new button" and "Volume+" in the OSD.
8
Within 15 seconds, press the key you wish to allocate to this function on the TV remote.

Canton Smart Sounddeck 100 Specifications

General

Audio decoders	Dolby Atmos
RMS rated power	- W
Audio output channels	- channels
Audio Return Channel (ARC)	Yes
Wi-Fi	-
HDCP version	2.2
HDMI ports quantity	4
Connectivity technology	Wired
Product color	Black
Wall mountable	No
Audio formats supported	DTS

Weight and Dimensions

Width	- mm
Soundbar weight	- g