Canton Smart Sounddeck 100 User Manual

3
23
English
To adjust the distance please do as follows:
1
To enter the menu, press the "M" button.
2
Enter the first menu item Speaker Setup [SPS] by pressing "OK".
3
Select the menu item Distance [DST] using the " " or " " button and confirm with the "OK" button.
4
Select the speaker that you want to adjust the distance of by using the " " or " " button and press "OK".
All deactivated speakers are greyed out and cannot be adjusted.
You can find additional information in the description in the "Sub output" and "Wireless speaker pairing" part.
5
You can adjust the distance by using the "+" and "–" buttons. To go back to the speaker list press the "OK" button.
6
Press the "M" button to exit this menu item.
Equalizer [EQ]
The Equalizer menu allows you to select three different equalizers for the Sounddeck and/or connected speakers to match the room condi-
tions. If the Sounddeck 100 is not positioned freely in the room an adjustment is recommended.
To adjust the equalizer please do as follows:
1
To enter the menu, press the "M" button.
2
Enter the first menu item Speaker Setup [SPS] by pressing "OK".
3
Select the menu item Equalizer [EQ] using the " " or " " button and confirm with the "OK" button.
4
Select the first menu item Soundbar [SBR] resp. select the desired speaker by using the " " and " " button and confirm your selection by
pressing "OK". Only physically available speakers are selectable, all other speakers are grayed out.
You can find additional information in the description in the "Sub output" and "Wireless speaker pairing" part.
5
Use the "+" or "-" button to select the wanted equalizer EQ1, EQ2, or EQ3.
• Use EQ1 for free installation of the front speakers (factory setting)
• Use EQ2 for installation on a rear or side panel
• Use EQ3 for installation in a corner of the room
6
Press the "M" button to exit this menu item.
Voice Clarity [VOI]
Use the “Voice Clarity” function to improve the speech intelligibility. This allows you to better understand dialogues (speech) in films with
loud effects, for example.

Canton Smart Sounddeck 100 Specifications

General

Audio decoders	Dolby Atmos
RMS rated power	- W
Audio output channels	- channels
Audio Return Channel (ARC)	Yes
Wi-Fi	-
HDCP version	2.2
HDMI ports quantity	4
Connectivity technology	Wired
Product color	Black
Wall mountable	No
Audio formats supported	DTS

Weight and Dimensions

Width	- mm
Soundbar weight	- g